|
| Title: |
CBQ 160 |
| Description: |
|
| Photo Date: |
2/11/1955 Upload Date: 5/11/2005 11:04:45 PM |
| Location: |
Peoria, IL |
| Author: |
|
| Categories: |
|
| Locomotives: |
CBQ 160A(F3A) CBQ 9212(NW2) |
| Views: |
1494 Comments: 2 |
|
|
|
| Title: |
CB&Q NW2 9212 |
| Description: |
Chicago Burlington & Quincy Railroad NW2 9212 on the East End Way Freight at Naperville, Illinois on July 15, 1963, photo by Chuck Zeiler. This locomotive was built in April 1941 (c/n 1293) on EMD Order E376, became BN 509, and was retired in May 1983. Note the second air hose, used for communication when switching passenger trains. It also shows the straight stacks applied by the Burlington on their pre-war (WWII) NW2's. |
| Photo Date: |
7/15/1963 Upload Date: 12/17/2008 11:46:45 AM |
| Location: |
Naperville, IL |
| Author: |
Chuck Zeiler |
| Categories: |
Roster |
| Locomotives: |
CBQ 9212(NW2) |
| Views: |
713 Comments: 1 |
|
|
|
| Title: |
CB&Q NW2 9212 |
| Description: |
Chicago Burlington & Quincy Railroad NW2 9212 on the East End Way Freight on July 15, 1963, photo by Chuck Zeiler. This locomotive was built in April 1941 (c/n 1293) on EMD Order E376, became BN 509, and was retired in May 1983. Note that it has a second air hose, indicating it was set up for signals from the communication air hose, generally used in passenger service/switching. It is coupled to an MP and PRR boxcar, common freight cars in this neighborhood at this time, indicating perhaps that the suppliers for Kroehler Mfg. Co., which 9212 was switching, were located in the MP & PRR service areas. The Naperville train station is in the background. |
| Photo Date: |
7/15/1963 Upload Date: 1/9/2009 10:57:11 PM |
| Location: |
Naperville, IL |
| Author: |
Chuck Zeiler |
| Categories: |
Roster |
| Locomotives: |
CBQ 9212(NW2) |
| Views: |
1043 Comments: 0 |
|
|
|
| Title: |
CB&Q NW2 9212 |
| Description: |
Chicago Burlington & Quincy Railroad NW2 9212 at Naperville, Illinois on July 15, 1963, photo by Chuck Zeiler. This is the East End Way Freight (on this date it is officially Extra 9212 East), which left Eola at about 7:00 AM Monday through Friday and switched the industries between Eola and Congress Park. It's about 9:00 AM and the way freight has finished switching Kroehler (a furniture manufacturer) and has set out the cars for Boecker, the grain tower in the background, and Moser Lumber. Seen here backing the way freight onto main Track #1, the locomotive will cut off the train, leaving it on the main, and pull forward down the Boecker lead and pick up the empties (or loads, Boecker received coal and shipped grain). He will back up, shove forward and couple onto the loads (or empties) he set out earlier for Boecker and spot them for Boecker to unload (or load). Then with the Boecker loads (or empties) and Moser's loads of lumber on the front of the locomotive, he will couple onto his train and pull forward to clear the crossovers on the three main tracks. When the dispatcher gives permission, the way freight will back across all three mains. Once on Track 3 (the closest track in this photo), he will switch Moser Lumber, again freight cars handled on the front of the loco. When all is complete, he will perform a "flying switch" maneuver to get the freight cars on the front of his loco onto his train which is parked on Track 3. The procedure is to back about a half mile from the Moser switch, accelerate toward the switch, about half way there cut the loco off at speed, continue to accelerate toward the switch, heading the loco into the siding and lining the switch so the loose freight cars will drift past the switch and smack into the standing way freight. |
| Photo Date: |
7/15/1963 Upload Date: 5/8/2009 8:10:20 PM |
| Location: |
Naperville, IL |
| Author: |
Chuck Zeiler |
| Categories: |
Roster |
| Locomotives: |
CBQ 9212(NW2) |
| Views: |
632 Comments: 0 |
|
|
|
